Ela Trade - Welcome to Our Web Site ....

TNK Hydraulic HLP Hydraulic Oil Series




DESCRIPTION

TNK Hydraulic HLP series is specially designed for application in hydraulic systems of imported and locally made industrial equipment, which require the use of high grade additive-type lubricants.
TNK Hydraulic HLP oils are high quality hydrotreated mineral base stocks, blended with multifunctional additive package, which improves anti-oxidation, anti-corrosion, anti-wear, pour point depressive, de-emulsifying, anti-foam properties. This oil is intended for use in hydraulic systems of industrial equipment, operating under mechanical and thermal stresses and equipped with servo-hydraulic devices, proportional control systems and filter elements with filtration ratio of 3-5 micron.

FEATURES

TNK Hydraulic HLP series have following advantages:
 Complies with requirements of the majority of equipment manufacturers, reduces the number of oil types demanded by the enterprise
 Reduces wear of system components due to improved package of extreme pressure additives
 Prevents corrosion, reduces water impact on the system
 Improved air separation and anti-foam properties reduce penetration of air bubbles into operating area of the system, diminish the risk of damage to pumps
 Blended with imported additive package
 Has improved filterability, proved by 1,2 micron membrane tests by Dennison method

STANDARDS/APPROVALS

TNK Hydraulic HLP series is developed in accordance with DIN 51524 part II (HLP) requirements. Complies with ISO 11158, ASTM D6158 (HM). Approved by Bosch-Rexroth, Denison HFO, HF1, HF2, Eaton, Vickers 35 VQ25, Cincinatti Milacron P-68, P-69, P-70 standards. Oils have been tested at JSC «AvtoVAZ» and JSC «Tyazhpress-mash» with positive results and recommended for use in technological equipment along with imported lubricants.

TYPICAL CHARACTERISTICS

TNK Hydraulic HLP 32 46 68
Kinematic viscosity at 40o, mm2/s 32.6 45.8 67.4
Viscosity index 98 98 97
Density at 20°oC, g/cm3 0.873 0.879 0.882
Flash point COC, oC 216 220 228
Pour point, oC -25 -20 -20
TAN, mg KOH/g 0.59 0.63 0.57

 

Produced according to Technical Specifications 38.301-41-180-01
This information serves as reference and can be changed without notice.
Produced on June 18, 2010. This version supersedes all previous descriptions of the product
Copyright © 2021 Ela Trade